Notes On Wiring Signal Inputs And Outputs; Electrical Shielding Of Cables; Fig. 4-24: Shielded Signal Cable, Shielding Connected At Both Ends - Emerson X-STREAM XE Instruction Manual

X-STREAM XE

4.7 Notes On Wiring Signal Inputs and Outputs

Emerson Process Managament has made
every effort during the development process,
to ensure that the X-STREAM analyzer series
ensures electromagnetic compatibility (EMC)
with respect to emission and interference resi-
stance, as confirmed by EMC measurements.
4.7.1

Electrical Shielding of Cables

In order to minimise ambient electromagne-
tic interference, it is necessary to take care
making all electrical connections between the
analyzer and any other devices:
•
We recommend using only shielded signal
cables. The shielding must be connected
at both ends to the housing (Fig. 4-24).

Fig. 4-24: Shielded Signal Cable, Shielding Connected At Both Ends.

4-32
4.7 Installation - Notes on Wiring
However, EMC is not wholly influenced by the
design of the instrument, but to a large degree
by the on-site installation process. Please
observe the following sections and precauti-
ons to guarantee the safe and problem-free
operation of this analyzer.
Emerson Process Management GmbH & Co. OHG
Instruction Manual
HASXEE-IM-HS
10/2012