Emerson X-STREAM XE Instruction Manual page 197

Instruction Manual
HASXEE-IM-HS
10/2012
6.2.3.2.2 Setup Calibration Tolerances
Setup..
Calibration..
Tolerances..
Ch2
Tolerances
DeviatToler.:
Zero Limit:
Span Limit:
Emerson Process Management GmbH & Co. OHG
6.2.3 Setup Menu
Multi-channel unit:
In SELECT COMPONENT, select the chan-
nel to be configured.
This parameter determines whether the tole-
rance check is active during calibration (On),
or not (Off).
Off
If tolerance check is enabled (On), setup the
20.0 %
limits for zero and span gas individually.
20.0 %
Accepted values:
(of the channel´s full range)
Multi-channel unit:
Press
to change the settings for another channel.
X-STREAM XE
0 ... 100 %
left to enter SELECT COMPONENT,
6-35