Image Access WideTEK 36ART Setup Instructions page 9

➢ Only connect the scanner with the plug of the supplied AC adapter to a
professionally installed and grounded outlet.
➢ Do not use the AC adapter if the power supply's housing or the cable are
damaged. In this case, replace the power supply with a power supply of
the same type.
➢ Do not use the scanner if it is visibly damaged. In this case, unplug the
power cord from the wall outlet. Contact Image Access technical
support, see section Technical Support starting at page 7.
Avoid Burns
➢ Do not cover the existing openings in the scanner housing. They serve to
ventilate. Covering the openings could cause overheating.
➢ Do not place the scanner in front of air conditioning units, which
produce high heat.
Avoid Fractures, Contusions and Bruises
Incorrect installation of the cables can cause tripping.
➢ Lay the connecting cables so that no one can trip over them.
The scanner weighs 160 kg.
➢ Only carry the scanner with a second person and a floor jack. Follow the
"Unpacking and Repacking Instructions".
➢ Place the scanner only on a stable, vibration free floor.
➢ Make sure that the scanner is leveled, as described in the "Assembly
Instructions".
Safety
9