Length:
Error:
Note:
The Length displayed here is the length of pair cable not that of the physical cable.
1.
The test result is just for your reference.
2.
15.4 Network Diagnostics
This switch provides Ping test and Tracert test functions for network Diagnostics.
15.4.1 Ping
Ping test function, testing the connectivity between the switch and one node of the network,
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
Choose the menu Maintenance→Network Diagnostics→Ping to load the following page.
The following entries are displayed on this screen:
Ping Config
Destination IP:
Ping Times:
Data Size:
Interval:
If the connection status is normal, here displays the length range of
the cable.
If the connection status is close, open or impedance, here displays
the error length of the cable.
Figure 15-8 Ping
Enter the IP address of the destination node for Ping test.
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
Enter the size of the sending data during Ping testing. The default
value is recommended.
Specify the interval to send ICMP request packets. The default
value is recommended.
226