Vlan Config - TP-Link JetStream T1500G-10MPS User Manual

8.1.3 VLAN Config

Multicast groups established by IGMP Snooping are based on VLANs. On this page you can
configure different IGMP parameters for different VLANs.
Choose the menu Multicast→IGMP Snooping→VLAN Config to load the following page.
The following entries are displayed on this screen:
VLAN Config

VLAN ID:
Router Port Time:
Member Port Time:
Router Ports:
Static Router Ports

UNIT:1/LAGS:
Figure 8-6 VLAN Config
Enter the VLAN ID to enable IGMP Snooping for the desired
VLAN.
Specify the aging time of the router port. Within this time, if the
switch doesn't receive IGMP query message from the router
port, it will consider this port is not a router port any more. By
default, it is 0 and the global router-time will be used.
Specify the aging time of the member port. Within this time, if
the switch doesn't receive IGMP report message from the
member port, it will consider this port is not a member port any
more. By default, it is 0 and the global member-time will be used.
Specify the static router port which is mainly used in the
network with stable topology.
Click 1 to configure the physical ports. Click LAGS to configure
the link aggregation groups.
98