Firmware Upgrade; System Reboot - TP-Link JetStream T1500G-10MPS User Manual

Note:
It will take a few minutes to backup the configuration. Please wait without any operation.

4.3.4 Firmware Upgrade

The switch system can be upgraded via the Web management page. To upgrade the system is
to get more functions and better performance. Go to
updated firmware.
Choose the menu System→System Tools→Firmware Upgrade to load the following page.
Please pay attention to the checkbox "After upgrading, the device will reboot automatically
with the backup image". If the checkbox is checked, the switch will reboot with the uploaded
firmware file, and the current Next Startup Image will switch to the Backup Image. If the
checkbox is not checked, the uploaded firmware file will take place of the Backup Image. To
start with the uploaded firmware, you should exchange the Next Startup Image and Backup
Image in Boot Config
Note:
1. Don't interrupt the upgrade.
2. Please select the proper software version matching with your hardware to upgrade.
3. To avoid damage, please don't turn off the device while upgrading.
4. After upgrading, the device will reboot automatically.
5. You are suggested to backup the configuration before upgrading.

4.3.5 System Reboot

On this page you can reboot the switch and return to the login page. Please save the current
configuration before rebooting to avoid losing the configuration unsaved
Figure 4-13 Firmware Upgrade
and reboot the switch.
http://www.tp-link.com
26
to download the