Network Diagnostics; Ping - TP-Link T2500G-10TS User Manual

Error:
Note:
The interval between two cable tests for one port must be more than 3 seconds.
1.
The result is more reasonable when the cable pair is in the open status.
2.
The test result is just for your reference.
3.
If the port is 100Mbps and its connection status is normal, cable test can't get the length of
4.
the cable.

15.4 Network Diagnostics

This switch provides Ping test and Tracert test functions for network diagnostics.

15.4.1 Ping

Ping test function, testing the connectivity between the switch and one node of the network,
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
Choose the menu Maintenance→Network Diagnostics→Ping to load the following page.
If the connection status is close, open or impedance, here displays
the error length of the cable.
Figure 15-8 Ping
264