Daylight Saving Time - TP-Link JetStream T1500G-10MPS User Manual

Time Config

Manual:
Get Time from NTP
Server:
Synchronize
PC'S Clock:
Note:
1. The system time will be restored to the default when the switch is restarted and you need to
reconfigure the system time of the switch.
2. When Get Time from NTP Server is selected and no time server is configured, the switch will
get time from the time server of the Internet if it has connected to the Internet.

4.1.4 Daylight Saving Time

Here you can configure the Daylight Saving Time of the switch.
Choose the menu System→System Info→Daylight Saving Time to load the following page.
When this option is selected, you can set the date and time
manually.
When this option is selected, you can configure the time zone
and the IP Address for the NTP Server. The switch will get UTC
automatically if it has connected to an NTP Server.
Time Zone: Select your local time.

Primary/Secondary Server: Enter the IP Address for the

NTP Server.
Update Rate: Specify the rate fetching time from NTP

server.
with When this option is selected, the administrator PC's clock is
utilized.
Figure 4-6 Daylight Saving Time
19