Network Diagnostics - TP-Link TL-SL3428 User Manual

Nqqrdcem"Rqtv" "
"
Nqqrdcem"Rqtv<"
Vguv<"
3606"Pgvyqtm"Fkcipquvkeu"
This switch provides Ping test and Tracert test functions for network diagnostics.
360603" Rkpi"
Ping test function, testing the connectivity between the switch and one node of the network,
facilitates you to test the network connectivity and reachability of the host so as to locate the
network malfunctions.
Choose the menu Ockpvgpcpeg→Pgvyqtm"Fkcipquvkeu→Rkpi to load the following page.
The following entries are displayed on this screen:
Rkpi"Eqphki"
"
Fguvkpcvkqp"KR<"
Rkpi"Vkogu<"
Fcvc"Uk|g<"
Kpvgtxcn<"
Select the desired port for loopback test.
Click the Test button to start the loopback test for the port.
Figure 14-9 Ping
Enter the IP address of the destination node for Ping test.
Enter the amount of times to send test data during Ping testing. The
default value is recommended.
Enter the size of the sending data during Ping testing. The default
value is recommended.
Specify the interval to send ICMP request packets. The default value
is recommended.
203