TP-Link JetStream T1500G-10MPS User Manual page 111

8-port gigabit smart switch
Hide thumbs Also See for JetStream T1500G-10MPS:
Table of Contents

Advertisement

Member Port Time:
Replace Source IP:
Dynamic Router
Ports:
Static Router Ports:
Forbidden Router
Ports:
Note:
The router port should be in the multicast VLAN, otherwise the member ports cannot
1.
receive multicast streams.
The Multicast VLAN won't take effect unless you first complete the configuration for the
2.
corresponding VLAN owning the port on the 802.1Q VLAN page.
Configure the link type of the router port in the multicast VLAN as Tagged otherwise all the
3.
member ports in the multicast VLAN cannot receive multicast streams.
After a multicast VLAN is created, all the IGMP packets will be processed only within the
4.
multicast VLAN.
Configuration procedure:
Step Operation
1
Enable
IGMP
function
2
Create a multicast VLAN
3
Configure parameters for
multicast VLAN
4
Look
over
configuration
Application Example for Multicast VLAN:
Specify the aging time of the member port. Within this time, if
the switch doesn't receive IGMP report message from the
member port, it will consider this port is not a member port any
more.
Specify the IP address with which the switch will replace the
source of IGMP packets.
Displays the dynamic router ports of the multicast VLAN.
Specify the static router port which is mainly used in the
network with stable topology.
Specify the forbidden router ports which is mainly used to forbid
ports becoming router ports.
Description
Snooping
Required. Enable IGMP Snooping globally on the switch
and
for
Snooping→Snooping Config and Port Config page.
Required. Create a multicast VLAN and add all the
member ports and router ports to the VLAN on the
VLAN→802.1Q VLAN→VLAN Config page.
Configure the link type of the router ports as Tagged.
Optional. Enable and configure a multicast VLAN on the
Multicast→IGMP Snooping→Multicast VLAN page.
It is recommended to keep the default time parameters.
the
If it is successfully configured, the VLAN ID of the
multicast VLAN will be displayed in the IGMP Snooping
Status
Snooping→Snooping Config page.
the
port
table
on
101
on
Multicast→IGMP
the
Multicast→IGMP

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents