Program Sequence; End Of Program; Turning Off - Miele PG 8536 Operating Instructions Manual

Operation
Operating level C
,
Make sure that no metallic parts
or pieces are stuck to the magnetic
strip or its underside.
Attached metallic objects can cause
the coding to be misread or
unreadable.
,
Before pressing the start button
to begin the program, it is essential
to check that the program required
for this mobile unit is the one
shown in the display!
Otherwise, inadequate cleaning and
disinfection could result!
Always make sure that the mobile
units with automatic recognition
(AWK) are properly coded.
^ Push the coded mobile unit into
place in the washer-disinfector.
^ Close the door.
^ Press the h start button.
The program runs.
54

Program sequence

Once started, the program proceeds
automatically.
As it proceeds, the program steps are
shown in the display.
Detailed information on program
sequences is available in the
appendix to the Programming
manual.

End of program

Once the program ends, you will see
Programme finished

Turning off

^ Press the s button.
During operation breaks of several
days, close the water taps and
disconnect the washer-disinfector
from the mains.
in the display.