Changing The Program Sequence - Miele NOVOTRONIC W1918 Operating Instructions Manual

Changing the program sequence

To cancel a program:
^ Turn the program selector to
"Finish/Start".
To interrupt a program:
^ Press the "ON/OFF" buttton.
To continue the program, turn the ma-
chine back on.
To change an incorrectly selected
program:
^ Turn the program selector switch to
"Finish/Start".
When only the "On" lamp is lit, a new
program can be selected.
To change a program which has been
"locked" using the Child Safety feature,
see the "Programmable functions" sec-
tion.
Changing the program sequence
To omit a program stage:
A program stage must first be reached
to be omitted. When the sequence indi-
cator lamp of the program stage you
would like to omit illuminates:
^ Turn the program selector to
"Finish/Start"
As soon as the program sequence indi-
cator lamp for the stage you wish to en-
ter starts flashing:
^ Turn the program selector switch to
the desired program.
11