Special Features In The Program Sequence; Spinning; Omitting The Final Spin (Rinse Hold); Anti-Crease - Miele PWM 514 Operating And Installation Instructions

Final spin speed
Rinse-spin
Omitting the final
spin (Rinse hold)

Anti-crease

Special features in the program sequence

Spinning

When a program is selected, the maximum spin speed for this wash
program is shown in the display.
You can reduce the final spin speed.
However, you cannot select a final spin speed higher than that shown
in the chart.
There is a spin cycle after the main wash and between the rinse cy-
cles. A reduction in the final spin speed will also reduce the rinse-spin
speed as appropriate.
Select the Rinse hold extra option and then the Drain program. After

the last rinse cycle, the water will be pumped away and the Anti-
crease phase will switch on.
At the end of the program, the drum continues to turn at intervals for
up to 30 minutes to help prevent creasing. The washing machine can
be opened at any time.
There is no anti-crease phase at the end of some programs.
49