Table of Contents
Advertisement
Starting a program
Check whether the right reprocessing program for the load carrier
is displayed in the header.
With the button, you can open the menu for selecting the repro-
cessing programs if you wish to choose a different reprocessing
program.
Universal
Time left
After selecting a program, the time left for the selected reprocessing
program is displayed. If the
activated in the web interface, the display switches to the already
Duration
elapsed
of the reprocessing program after program start.
Press the button.
The reprocessing program starts.
It is only possible to start a reprocessing program when the machine
doors are closed and there are no fault messages.
If the symbol is displayed in the footer, you must work through
the list of active messages first (see "Fault messages and instruc-
tions").
Program sequence
The program will run automatically once it has been started. You can
find detailed information about the program sequence and the pro-
gram parameters on the machine display (see "Machine description",
"Control panel on the display").
1 : 0 6
Display time remaining
Operation
user/
BED
US
18.06.2018 15:05
parameter is not
51
Advertisement
Table of Contents
