Starting A Program; Adding Laundry During A Program Sequence (Addload) - Miele WXD 160 Operating Instructions Manual

Starting a program

 Touch the flashing Start/Add
laundry sensor button.
The door will lock and the program will
start.
If a Delay start time has been selected,
this counts down on the time display. At
the end of the Delay start time or
immediately after the program has
started, the program duration will
appear in the time display.
Energy savings
After 10 minutes, the indicators dim.
The Start/Add laundry sensor button
flashes.
You can reactivate the indicators:
 Touch the Start/Add laundry sensor
button (this does not have any effect
on a program that is running).
6. Starting a program
Adding laundry during a
program sequence (AddLoad)
Laundry can be added or removed at
any time, provided that the  symbol
is not illuminated on the control field.
 Touch the Start/Add laundry sensor
button.
Rotating bars  ...  ...  are
shown in the time display.
If the word  appears on the time
display, the door can be opened.
 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Add laundry sensor
button.
The wash program will continue.
Laundry cannot usually be added or
removed if:
- The suds temperature is above 55°C.
- The water inside the drum is above a
certain level.
27