Table of Contents
Advertisement
Present values
MC320 does not have all described measurements supported (see chapter Type differences, pages 11)
PLEASE NOTE
Since measurement support depends on connection mode some display groups can be
combined in to one, within Measurements menu.
Calculation and display of measurements
This chapter deals with capture, calculation and display of all supported quantities of measurement. Only the
most important equations are described; however, all of them are shown in chapter Equations on page 72 with
additional descriptions and explanations.
MC320 does not have all described measurements supported (see chapter Type differences on pages 11)
PLEASE NOTE
Calculation and display of measurements depend on the device type and connection used.
For more detailed information see chapters Survey of supported measurements regarding
connection mode on page 39.
For entry and quitting measurement display menu, the OK key is used. Direction keys (left / right / up / down)
are used for passing between displays as show in example below.
Example for MC330 at 4u connection mode:
Main menu Main menu Measurements Present values Voltage OK
42
Measuring centres – MC320, MC330, MC350 & MC350H ‐ User's Manual
MEASUREMENTS
Advertisement
Table of Contents
