Software Upgrading; Setting Procedure - Iskra MC320 User Manual

Software upgrading
Always use the latest version of software, both MiQen and software in the device. The program automatically
informs you about available upgrades that can be transferred and used for upgrading.
PLEASE NOTE
More information about MiQen software can be found in MiQen Help system!
MiQen 2.x user interface
Setting procedure
Before setting the instrument by means of MiQen, the current settings should be read first. Reading is available
either via communication or from a file (stored on a PC local disk). A setting structure that is similar to a file
structure in an explorer is displayed in the left part of the MiQen setting window. Available settings of that
segment are displayed in the right part by clicking any of the stated parameters.
PLEASE NOTE
Some settings are probably not available due to unsupported measurements and/or
functions that depend on the device type. For a survey of supported measurements and
functions see chapter Type differences, pages 11.
24 Measuring centres – MC320, MC330, MC350 & MC350H ‐ User's Manual
SETTINGS