Usb; Service Usb (Mc320 And Mc330 Only) - Iskra MC320 User Manual

USB
USB communication serves as a fast peer‐to‐terminal data link. The device is detected by host as a USB 2.0
compatible device. The USB connection is provided through a USB standard Type B connector.
PLEASE NOTE
When MC3x0x is connected to a PC through USB communication for the first time, a user is
prompted to install a driver. The driver is integrated in MiQen software or can be
downloaded from the Iskra, d.d. web page www.iskra.eu. With this driver installed, USB is
redirected to a serial port, which should be selected when using MiQen software.
Service USB (MC320 and MC330 only)
Service USB communication serves as a fast peer‐to‐terminal data link. The device is detected by host as a USB
2.0 compatible device. Service USB connection is provided through a USB mini‐B type connector.
Service USB is intended only for parameterisation of the meter and is not galvanic separated. Advantage is that
in this case meter does not need a power supply to communicate. Communication via service port is time limited.
When using service communication, power supply and measuring voltages need to be disconnected.
WARNING!
Service USB communication is not galvanic separated!
When using service USB communication, power supply and measuring voltages need to be
disconnected!
PLEASE NOTE
When MC3x0x is connected to a PC through USB communication for the first time, a user is
prompted to install a driver. The driver is integrated in MiQen software or can be
downloaded from the Iskra, d.d. web page www.iskra.eu. With this driver installed, USB is
redirected to a serial port, which should be selected when using MiQen software.
18 Measuring centres – MC320, MC330, MC350 & MC350H ‐ User's Manual
CONNECTION