Table of Contents
Advertisement
BASIC DESCRIPTION AND
OPERATION
Introduction
Regarding the type of a Measuring centre different chapters should be considered since the types differ in
functionality and design. More detailed description of device functions is given in chapter Type differences, pages
11. All types of measuring centres are available in DIN housing.
Description of symbols
In different chapters or tables different symbols may appear in User's Manual. According to the position of
symbols, they have different meaning.
SUBCHAPTER
Symbols next to the subchapters indicate accessibility of functions described. Accessibility of functions is
indicated with the following symbols:
‐ Function accessible via communication (MiQen software)
‐ Function accessible via navigation keys on the device front side
TABLES
Supported functions and measurements are listed in tables for all types. Symbols in tables indicate support of
enabled functions for each type. Additionally a legend is placed below table of used symbols. Meaning of symbols
is:
‐ Function is supported
‐ Function is not supported
‐ Symbol meaning varies and is described in the legend below the table
For all unknown technical words see chapter Glossary on next page.
8
Measuring centres – MC320, MC330, MC350 & MC350H ‐ User's Manual
BASIC DESCRIPTION AND OPERATION
Advertisement
Table of Contents
