CEStronics WT-I Fitting And Operating Instructions page 51

The programming of your wall terminal starts automatically. One
after the other, the following messages appear:
After the programming has been completed, separate the

connections between your PC and the wall terminal.
Finally fit the wall terminal again.

OMEGA FLEX wall terminals WT-I/WT-II
A locking device (wall terminal) has been
connected and the device data are being
read in.
The events of the locking device are being
read in.
Data are being transmitted.
The data transfer to the locking device has
been completed. The device can now be
removed from the PC.
Programming via programming cable
Page 51 of 80