CEStronics WT-I Fitting And Operating Instructions page 43

Ensure that the LEDs (1) are at the top when the reader module

is fastened.
Fig. 21 – aligned horizontally
Push the cover on to the control module and the reader module

as shown in the following figures:
Insert the cover into the respective recesses.

Fig. 22 – insert the cover
Push the covers onto the control module and the reader

module, exerting only a slight pressure.
Fig. 23 – push the cover
OMEGA FLEX wall terminals WT-I/WT-II
Fitting the wall terminal
Page 43 of 80