CEStronics WT-I Fitting And Operating Instructions page 25

5.6.5 RF-TRACE-MASTER
The RF-TRACE-MASTER allows you to check the quality of the radio
frequency (RF) link between the Access Point and your locking
devices.
Hold the RF-TRACE-MASTER in front of your locking device for

about two seconds.
The verification is performed immediately.
The RF-TRACE-MASTER triggers the following signals of your
locking devices:
 Green LED of your locking device, IES or wall terminal flashes
twice: very strong RF link.
 Green LED of your locking device, IES or wall terminal flashes
once: adequate RF link.
 Red and green LEDs flash alternately or simultaneously: weak
RF link.
 Red LED of your locking device, IES or wall terminal flashes: No
RF link established and trouble-shooting required.
During the verification, the Access Point emits the
same signals as the locking device.

OMEGA FLEX wall terminals WT-I/WT-II
Introduction
Page 25 of 80