Preface; Versions; Manufacturer And Service - CEStronics WT-I Fitting And Operating Instructions

3

Preface

These Fitting and Operating Instructions will help you fit and use
the OMEGA FLEX wall terminals WT-I/WT-II (the "wall terminal")
as intended, safely and advantageously.
Any person who programs, operates or disposes of this wall
terminal must have read and understood the entire contents of
these Fitting and Operating Instructions.
These Fitting and Operating Instructions should be kept within
reach at all times as long as the wall terminal is used.
These Fitting and Operating Instructions should be handed over to
the end users.
Be sure to use the most recent version of these Fitting
and Operating Instructions. Updated versions are

available free of charge at www.ces.eu.
3.1

Versions

These Fitting and Operating Instructions only apply to:
CEStronics OMEGA FLEX wall terminals WT-I/WT-II,
in all variants
3.2

Manufacturer and Service

The manufacturer of the wall terminal is:
CEStronics GmbH
Friedrichstr. 243
42551 Velbert
Tel: +49 (0) 2051-204-0
Fax: +49 (0) 2051-204-105
www.ces.eu
For service support please contact your professional CEStronics
partner.
OMEGA FLEX wall terminals WT-I/WT-II
Preface
Page 5 of 80