CEStronics WT-I Fitting And Operating Instructions page 40

Fitting the wall terminal
2.
Fig. 17 – aligned horizontally
3.
Fig. 18 – insert the cover
4.
Fig. 19 – push the cover on
Page 40 of 80




OMEGA FLEX wall terminals WT-I/WT-II
Ensure that the two
LEDs (1) of the wall
terminal are at the top
when the wall terminal
is fastened.
Push the cover on to
the control module as
shown in the following
figures:
Insert the cover into
the recesses.
Push the cover onto the
control module,
exerting only a slight
pressure.