CEStronics WT-I Fitting And Operating Instructions page 49

1.
Fig. 28 – release the cover
2.
Fig. 29 – lift off the cover
For the WT-II, the programming cable must be
plugged into the control board. The reader does
not have an interface.
OMEGA FLEX wall terminals WT-I/WT-II
Programming via programming cable
Release the cover carefully

from the control module
using a wide slotted-head
screwdriver.
To do so, insert the

slotted-head screwdriver
into the recess as shown
below.
Lift off the cover.

Page 49 of 80