Fitting the wall terminal
1.
Fig. 12 – lift the wall terminal
2.
Fig. 13 – release the cover
3.
Fig. 14 – lift off the cover
4.
Fig. 15 – fit the wall terminal
Page 36 of 80
Lift the wall terminal from the
fitting frame.
You now hold the control module
with the cover in your hands.
Release the cover carefully
from the control module using
a wide slotted-head
screwdriver.
To do so, insert the slotted-
head screwdriver into the
recess as shown below.
Lift off the cover.
You can now fit the control
module through the two oblong
holes (1).
This completes the disassembling.
OMEGA FLEX wall terminals WT-I/WT-II