Fitting The Wall Terminal - CEStronics WT-I Fitting And Operating Instructions

Fitting the wall terminal

6 Fitting the wall terminal
The wall terminal may be damaged if not fitted
properly.
The wall terminals may only be fitted by skilled

persons such as skilled electricians or CEStronics
partners trained on the product by CEStronics.
The wall terminal may be damaged by static
charges.
Do not fit the wall terminals in rooms with built up

static charge.
Ensure potential equalization when working on the

wall terminal to remove any static charge. The wall
terminals may only be fitted by skilled persons
such as skilled electricians or CEStronics partners
trained on the product by CEStronics.
Depending on the version you ordered, the
appearance of the boards and housings may differ.
The following illustrations show the CES standard
housing as an example.
Functioning and fitting are similar for all versions.
Page 26 of 80
NOTICE
NOTICE
OMEGA FLEX wall terminals WT-I/WT-II