Program Edit; General Properties - Delem DA-52s Reference Manual

A program can also be selected by entering its number directly.
To create a new program:
Type a number that does not exist yet. When entered, the control asks whether or not to
create a new program.
To delete a program:
Move the cursor bar to the correct program.
Press the 'clear' key. The program number changes to zero.
Press the ENTER key. The control will ask if you wish to delete the
selected program. Choose yes (1) to confirm or no (0) to cancel.
2.2.

Program edit

2.2.1. General properties

When a program has been selected (or created), a screen is shown with the general product
parameters. These parameters are the same for every bend of the program.
This page gives all data which are the same for every bending of the program (main data of
program).
V0812, 2.2
Use the 'enter' key to select the highlighted program.
2.b