Disarming; Bypassing Zone; Restoring Bypassed Zone; Turning Pgm On - Rosslare HomeLogix HLX-40 User Manual

Viewing System Information
7.3.3

Disarming

To disarm:
1. In the Actions area, click Disarm.
7.3.4

Bypassing Zone

To bypass a zone:
1. In the Actions area, select the zone number from the drop-down list.
Click Bypass.
2.
7.3.5

Restoring Bypassed Zone

To restore a bypassed zone:
1. In the Actions area, select the zone number from the drop-down list.
Click UnBypass.
2.
7.3.6

Turning PGM On

To turn ON PGM 1 or 2:
1. In the Actions area, click On for the relevant PGM.
7.3.7

Turning PGM OFF

To turn OFF PGM 1 or 2:
1. In the Actions area, click Off for the relevant PGM.
7.4

Refreshing the Panel Manually

You can refresh the panel manually using the system toolbar.
To refresh the panel status manually :
1. In the toolbar, click the
The system status view is displayed.
2. Change the system status settings, according to Section 7.2.
7.5

Refreshing the Panel Automatically

You can set automatic panel refresh sessions by following the next procedure.
To refresh the panel status automatically :
1. In the toolbar, click the
From the Menu bar, select Tools > Options.
2.
3. In the General tree view, select System View.
Panel View Settings
The
HomeLogiX™ HLX-40 Software Manual
icon.
icon.
area is displayed.
51