Communicating With The Panel; Setting The Panel Authorization Code; Uploading From A Panel - Rosslare HomeLogix HLX-40 User Manual

Communicating with the Panel

6. Communicating with the Panel
This chapter describes how to communicate with a wireless panel, and the
actions that can be performed.
6.1

Setting the Panel Authorization Code

An authorization code is used to authenticate communications between HR-
P02 software and the HomeLogiX-40 wireless panel. You need to set the panel
authentication code in the panel account before performing any type of
communication between the panel and the PC.
To set the panel authorization code:
Actions
1. From the
Download Authorization Code New Panel Account
The
2. Enter the new authorization code and confirm it.
Click OK.
3.
6.2 U ploading from a Panel
2 9 B
You can upload the current information defined for a wireless panel in order to
view and modify the existing configuration in one of two ways.
 Uploading from a local panel – When the panel is connected directly to
PC.
 Uploading from a remote panel – When the panel is connected remotely
via a modem.
To upload from a panel:
1. In the Panel Tree, select the panel account from which to upload.
2. Do one of the following:
From the Upload From menu, choose either Local Panel or Remote

Panel.
 Right-click the panel account and select Upload.
Click the

Upload Office
The
40
menu, select Change Authorization Code.
icon from the toolbar.
window opens.
HomeLogiX™ HLX-40 Software Manual
window opens.