Rosslare HomeLogix HLX-40 User Manual page 37

Editing a Panel Account
Section Property Item Description
Primary Reporting
Options
Primary Link Type –
CMS channel
Ack Timeout
Signal Gain
Secondary Phone
Number
Secondary Account
Code
Secondary
Reporting Options
Secondary Link
Type – CMS
channel
Reporting Protocol Defines the structure of the reported
Dialing Attempts
Days Between Line
Tests
Line Tests Time
AC Fail Reporting
Delay (Minutes)
Two Way Voice
(2WV) Setup
CS 2WV Mode
CS 2WV Timeout
(Seconds)
HomeLogiX™ HLX-40 Software Manual
The list of event types that are reported to
the Central Station using the primary
number. The options are: Alarms, Troubles,
Alerts, Bypass, Arm/Disarm, and Restore.
The link type used to call CMS primary.
Options are: Call via PSTN and Call via GSM.
The Call via GSM option is available, only if a
GSM stick is installed.
The time that the system has to send a
report event before the report alert is
discontinued.
The strength of the DTMF.
The secondary phone number used for the
panel to connect to the Central Station.
The account code for the secondary Central
Station connection.
The list of event types which are reported to
the Central Station using the secondary
number. The options are: Alarms, Troubles,
Alerts, Bypass, Arm/Disarm, and Restore.
The link type used to call CMS secondary.
Options are: Call via PSTN and Call via GSM.
The Call via GSM option is available, only if a
GSM stick is installed.
messages. Current option is: Contact ID.
The number of attempts (1-16) made by the
panel to connect to the Central Station.
The number of days (1-30) between tests of
the line connecting to the Central Station.
The time of day for testing the line to the
Central Station. Must be a round number.
The number of minutes (0-240) between an
AC power failure and the reporting of this
Ac power failure event (assuming the AC
power did not return during this period).
Define the way that 2-Way Voice
communication is made, and set the
preferences for this feature.
In this menu, the installer can Enable/Disable
the 2-Way Voice Mode of the system via the
PC. Click the drop-down menu and select
the option that you want to use.
The time that the HomeLogiX-40 panel waits
for 2WV actions from the CS.
37