Communications; Table 11: Editing A Panel - Communications - Rosslare HomeLogix HLX-40 User Manual

Editing a Panel Account
Section Property
Item
Tamper
Supervision
Dialer Fail
Line Fail
Panic
5.5

Communications

You can define the details for the communications between the Central
Station, which is monitoring the wireless panel, and the wireless panel itself.
You can also define private phone numbers and a paging service that can be
called by the wireless panel.
To access Communications:
1. In the Panel Tree, select a panel account.
Click Communications below the panel account name.
2.
3. After modifying the properties, save the configuration (see Section 4.3).
4. Once you have finished modifying the properties, download the latest
configuration to the wireless panel (see Section 6.3).
For the unit to accept the communication changes, you must activate the
installer programming on the panel itself, and then exit to update the dialer
with the configuration changes.
The following properties are available under Communications:
Section
Panel Phone
GPRS Settings
34
Description
Enable/disable arming the panel when a tamper
fault exists.
Enable/disable arming the panel when a supervision
fault exists.
Enable/disable arming the panel when a dialer
failure fault exists.
Enable/disable arming the panel when a line failure
fault exists.
Enable/disable arming the panel when a panic fault
exists.
Table 11: Editing a Panel – Communications
Property Item Description
Panel Phone
APN
User Name
Password
Server IP Address
Server Port Number Enter the network's server port number.
Listen Port Number Enter the Listen Port number with which the
The telephone number used to connect to
the wireless panel.
Enter the GPRS access point.
Enter the GSM provider name.
Enter the GSM provider's password.
Enter the network's server IP address.
software connects to the unit.
HomeLogiX™ HLX-40 Software Manual