Table of Contents
Advertisement
Technical information
Appendix A Technical information
A.1 Troubleshooting
The following table can help you solve problems when installing the router. If you cannot solve the problem, contact
your dealer for more information.
Symptom
None of the LEDs light up on
the router.
You have forgotten the router's
access password.
The LAN Switch LED never
turns green.
The Eth WAN LED never turns
green.
The Wi-Fi LED never turns
green.
A.2 Updating the software
The Teldat Connect-104KF routers can be updated to newer versions. Please contact your dealer for further details
on new versions.
There are several ways to update a Teldat router: Please see manual " Dm 748-I Software Updating " for further in-
formation.
The software required to update Teldat routers is supplied in a format known as distribution. This consists of a
single file that contains all the files needed to update your device as well as detailed information on the content of the
files.
A.3 Connecting to the device
A.3.1 Connecting using the local console (Aux connector)
Teldat Connect-104KF routers have an RJ45 female connector on the front panel labeled "Aux." that provides ac-
cess to the device's local console.
Fig. 13: Aux Connector
In order to configure the connector, you need to connect the " Aux." port to an asynchronous terminal (or to a PC
with terminal emulation).
The terminal configuration should be set to:
12
Solution
Check the power supply to the router (power source, ON/OFF switch, mains sock-
et).
Ignore the configuration using the RST button (as explained in the relevant sec-
tion).
Check the Ethernet cable and the connection to the network.
Verify that you have the appropriate license.
Check the Ethernet cable and the connection to the network.
Check your router's configuration and that of the remote station(s).
Verify that you have the appropriate license.
Teldat S.A.
Teldat Router Connect-104KF
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Connect 104KF TLDPM00A1 and is the answer not in the manual?
Questions and answers