Applied Biosystems StepOne Installation, Networking, And Maintenance page 77

3b
Notes
™
Applied Biosystems StepOne
Installation, Networking, and Maintenance Guide
2. Change the screen resolution:
In the Display Properties dialog box, select the Settings tab.
a.
In the Screen Area group box, use the slider to select 1280 by 1024 pixels.
b.
In the Colors group box, select Highest (32 bit) in the dropdown menu.
c.
Click OK twice, then click Yes to accept the new resolution.
d.
3. Define the date and time settings:
Right-click the time readout in the toolbar, then select Adjust Date/Time.
a.
In the Date & Time tab, define the date and time settings.
b.
Select the Time Zone tab.
c.
Select a time zone from the dropdown menu, then select Automatically adjust
d.
clock for daylight saving changes if necessary.
Click OK.
e.
Computers on a network synchronize their date/time settings with the server.
Note:
™
and StepOnePlus Real-Time PCR Systems
Chapter 4 Install the Standalone Layout
Set Up the Computer
2a
2b
2c
2d
3c
3d
3d
3e
55