Advertisement
Remove following
:
-
Thrust washer
-
Clutch outer
- Needle bearing
- Clutch outer guide
Clutch
Lifter lever Removal
Remove the alternator cover (page 14-6).
Disconnect the clutch cable from the clutch lifter lever by
loosening the clutch cable adjuster.
Remove the flywheel and stator (page 14-6).
Remove the return spring and clutch
lif
ter lever from the left
crankcase.
Inspect
the fo llowing:
-
Clutch lifter lever for damage
-
Oil seal for wear or damage
Clutch Lifter lever Installation
Coat the
clutch
lifter lever with grease, then install the clutch
lifter
lever
and return spring
.
Installation is in the reverse order of removal.
After installation, check the following
;
-
Ignition timing (page 14-8)
-
Clutch operation
Clutch/ Kickstarter/
Gearshift Linkage
/
(1) CLUTCH LIFTER LEVER
9 -5
Advertisement
