Flowserve Logix 3400MD User Instructions page 28

Fieldbus Fieldbus Variable
Block Name
Index
54 HOURS_SINCE_RESET
55 HOURS_LIFETIME
86 ERROR_HIST
Signature Parameters
56 SIG_START
57 SIG_STOP
58 SIG_RATE
59 SIG_HOLD
61 SIG_FLAGS
60 SIG_INDEX
88-113 SIG_DATAn
System Setup & Special Diagnostics Parameters
33 USER_INTERFACE_
INSTANT
34 USER_INTERFACE_
ACTIVE
24 TEST_MODE
62 TRAVEL_ACCUM_UNITS
63 PRESSURE_UNITS
64 INTERNAL_TEMP_UNITS
65 XD_FSTATE_OPT
66 ELECTRONICS_SN
67 SOFTWARE_VER_MAJOR
68 SOFTWARE_VER_MINOR
69 SOFTWARE_DATE_CODE
73 FB_POSITION_FILTER
75 LOAD_EE_DEFAULTS
System Setup & Special Diagnostc Fieldbus Only Parameters
28
Transducer Fieldbus
Block Datatypes
Register
XDTB_MAIN FLOAT 138
XDTB_MAIN FLOAT 139
XDTB_TECH ARRAY 140
XDTB_MAIN FLOAT 142
XDTB_MAIN FLOAT 143
XDTB_MAIN FLOAT 144
XDTB_MAIN FLOAT 145
XDTB_MAIN BIT_STRING 146
XDTB_MAIN UNSIGNED 16 147
XDTB_TECH ARRAY 148
XDTB_TECH BIT_STRING 36
XDTB_TECH BIT_STRING 37
XDTB_MAIN BIT_STRING 32
XDTB_MAIN UNSIGNED 8 150
XDTB_MAIN UNSIGNED 8 151
XDTB_MAIN UNSIGNED 8 152
XDTB_MAIN UNSIGNED 8 153
XDTB_MAIN VISIBLE_ 155
STRING
XDTB_MAIN UNSIGNED 16 156
XDTB_MAIN UNSIGNED 16 157
XDTB_MAIN VISIBLE_ 158
STRING
XDTB_TECH UNSIGNED 16 162
XDTB_TECH UNSIGNED 8 173
Logix 3400MD Digital Positioner FCD LGENIM3404-00 – 9/09
Logix Positioner
Fix
Type Pt Variable Name
Rd
U_LONG /10 Reset_Hours
U_LONG /10 Lifetime_Hours
U_CHAR NO ErrorHist [16]
S_INT /100 SIGstart
S_INT /100 SIGstop
U_INT /100 SIGtime
U_INT /100 SIGhold
U_CHAR NO SIGflags
U_INT NO ReadSigIndex
S_INT [24] /100 SigData
U_INT NO UI_Instant
U_INT NO UI_Saved
U_CHAR NO control_
disable_flg
U_CHAR NO TravelUnits
U_CHAR NO PressUnits
U_CHAR NO TempUnits
U_CHAR NO Fail_mode
U_CHAR NO ESN [8]
U_INT NO ESR_Major
U_INT NO ESR_Minor
STRING NO ESR_Build [6]
U_INT NO FB_Depth
U_CHAR NO EEmode
R/W Description
R Status, System, Time Elapsed,
Mem Reset
R Status, System, Time Elapsed,
Lifetime
R History of the last error/blink
codes
NRW Config, Signature, Starting
Command in %
NRW Config, Signature, Stopping
Command in %
NRW Time that a Signature takes to
complete a ramp cycle
NRW Time to continue to log
signature data after reaching
SIG_STOP
NRW Signture status and command
flags
NRW Index into the Signature Data
Array
R Signature Data Array
R Curent hardware DIP switch
and GAIN control seetings - not
applied to control algorythms.
RW Setup button and DIP switch
setting currently applied to
control algorythms
RW Turns on and off spceial
diagnostic capabilities
SRW Setup, Units, Travel Distance
SRW Setup, Units, Pressure
SRW Setup, Units, Temperature
SRW
NR Electronics Serial Number, used
for initial PD tag
NR Software Revision Major
NR Software Revision Minor
SRW Embedded Software Revision
Date Stamp
SRW Setup, Dampening, Position,
Depth
RW Test, FRAM, Mode Setting