Judgment Output Off Delay - Panasonic HL-G1**-A-C5 User Manual

 Judgment Output OFF Delay
This function delays the timing of switching ON to OFF of judgment output.
測
This function is useful for applying output to a control device when the
output is changing at high speed.
Setting
OFF
Output according to the sampling cycle.
2 ms
2-ms OFF-delay
4 ms
4-ms OFF-delay
10 ms 10-ms OFF-delay
20 ms
20-ms OFF-delay
40 ms
40-ms OFF-delay
100 ms 100-ms OFF-delay
Output once turned ON will be kept on
Hold hold. The output kept on hold will be
released with reset input.
* indicates the default value.
Judgment output timing
ON (OPEN)
OUT1
OFF
ON (OPEN)
OUT2
OFF
ON (OPEN)
OUT3
OFF
The solid lines shows OFF setting actions. OFF timing will be delayed according
to the OFF-delay set time as shown by the dotted lines.
• If actual output is turned ON earlier than the OFF-delay set time, the OFF-delay
set time will be enabled from the point where the output is turned OFF.
• If "Logic" or "Independent" or "2-state" is selected with the judgment output
selection function, OUT3 (alarm output) will not be OFF-delayed regardless of
OFF-delay settings.
• The output indicator will not be OFF-delayed.
Ramco National
Function
OFF delay setting time
800-280-6933 | nsales@ramcoi.com
Panel display
www.panasonicsensors.com