Table of Contents
Advertisement
Shutter Time
The shutter time controls the receiving light intensity of the sensor according
to the amount of reflected light from measurement targets.
If the shutter time is set to AUTO, the light intensity feedback function
automatically controls the light intensity to an optimum level. In the case of fixing
the shutter time, use the light intensity monitor and select a fixed value of
approximately 1000 to 1300.
Setting
AUTO
1 to 31
● Setting Procedure
1
Display the "Sensing Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The
"Sampling Cycle" screen will appear.
3
Press the [DOWN] key once. The
"Shutter Time" screen will be displayed.
4
Press the [ENTER] key. The present
shutter time will be displayed.
5
Press the [UP]/[DOWN] key to make
shutter time changes. (Example:
Changing the shutter time to 31.)
6
Press the [ENTER] key and determine
the shutter time.
The following table shows the relation between the set values for shutter time and
actual shutter apertures.
Shutter
Set value
aperture
AUTO
Auto
1
0.04%
2
0.05%
3
0.06%
4
0.08%
5
0.11%
6
0.14%
7
0.18%
Ramco National
800-280-6933 | nsales@ramcoi.com
Function
Shutter time automatic setting
Fixed (See the table below.)
Shutter
Set value
aperture
8
0.24%
9
0.31%
10
0.40%
11
0.53%
12
0.68%
13
0.89%
14
1.16%
15
1.50%
Initial value
Shutter
Set value
Set value
aperture
16
1.95%
17
2.54%
18
3.30%
19
4.29%
20
5.58%
21
7.25%
22
9.43%
23
12.3%
www.panasonicsensors.com
Shutter
aperture
24
15.9%
25
20.7%
26
26.9%
27
35.0%
28
45.5%
29
59.2%
30
76.9%
31
100%
Advertisement
Table of Contents
