● Setting Procedure
1
Display the "Output Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The "Judgment
Output Selection" screen will be displayed.
3
Press the [DOWN] key four times. The
"OFF-delay" screen will be displayed.
4
Press the [ENTER] key. OFF-delay
settings will be displayed.
5
Press the [UP]/[DOWN] key to make
OFF-delay setting changes. (Example:
Changing the setting to Hold.)
6
Press the [ENTER] key to determine the
OFF-delay setting.
Ramco National
800-280-6933 | nsales@ramcoi.com
www.panasonicsensors.com