Eco Mode - Panasonic HL-G1**-A-C5 User Manual

 Eco Mode
This function turns OFF the LED indicators on the control panel while in
RUN mode for energy saving.
Setting
Eco-OFF Eco Mode is OFF.
Only LEDs on the digital display will be
Eco-ON
turned OFF.
Other than LASER indicator, All the LEDs
Eco-FULL
will be turned OFF.
* indicates the default value.
• The display will be restored by switching while the LEDs are turned OFF while
the system is in eco mode. The LEDs will be turned OFF again if the system is
not operated for 20 seconds.
・ The LEDs will be always lit while the system is in setting mode.
● Setting Procedure
1
Display the "System Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The "Timing
Mode" screen will be displayed.
3
Press the [DOWN] key twice. The eco
mode screen will be displayed.
4
Press the [ENTER] key. The present
mode setting will be displayed.
5
Press the [UP]/[DOWN] key to make
mode changes. (Example: Changing
the mode to Eco-FULL.)
6
Press the [ENTER] key to determine the
mode setting.
Ramco National
Details
800-280-6933 | nsales@ramcoi.com
Panel display
www.panasonicsensors.com