System Settings; Timing Mode - Panasonic HL-G1**-A-C5 User Manual

3-3-9 System Settings

 Timing Mode
This function is used to set the timing input mode.
Set the operation of the system with timing input turned ON.
For the operation of the system in this mode, refer to "2-4 Timing Chart."
Setting
Hold
One Shot
* indicates the default value.
● Setting Procedure
1
Display the "System Setting" screen
while in setting mode.
2
Press the [ENTER] key. The "Timing
Mode" screen will be displayed.
3
Press the [ENTER] key. Hold/One Shot
will be displayed.
4
Press the [UP]/[DOWN] key to select
Hold or One Shot. (Example: Changing
the selection to "One Shot.")
5
Press the [ENTER] key to determine
the set value.
Ramco National
Function
Measurement hold with timing input
Measurement variable with timing
input
800-280-6933 | nsales@ramcoi.com
Panel display
www.panasonicsensors.com