Breaker Maintenance; Hiz Records - GE F60 Instruction Manual
Ur series
Hide thumbs
Also See for F60:
- Instruction manual (732 pages) ,
- Communications manual (532 pages) ,
- Communications manual (526 pages)
Table of Contents
Advertisement
6 ACTUAL VALUES
PATH: ACTUAL VALUES
RECORDS
BREAKER 1
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
There is an identical menu for each of the breakers. The
COMMANDS
CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
PATH: ACTUAL VALUES
RECORDS
HIZ RECORDS
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
MESSAGE
Two types of high impedance fault detection element records are stored in non-volatile memory and available from this
menu. If the element is triggered by a high impedance overcurrent condition, then the records are displayed in the
actual values. If the element is triggered by high impedance fault detection arcing algorithm, then the records are dis-
RMS 4
played in the
to
actual values. Refer to High impedance fault detection section in chapter 5 for more information.
HIZ 1
HIZ 4
GE Multilin
MAINTENANCE
BREAKER 1(2)
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
0.00 kA2-cyc
BKR 1 OPERATING TIME
φA:
0 ms
BKR 1 OPERATING TIME
φB:
0 ms
BKR 1 OPERATING TIME
φC:
0 ms
BKR 1 OPERATING
TIME:
0 ms
BKR 1 ARCING AMP
menu for clearing breaker arcing current records. The
HIZ RECORDS
FORCE TRIGGER:
No
HIZ 1:NONE
1970/01/01 00:00:00
HIZ 2:NONE
1970/01/01 00:00:00
HIZ 3:NONE
1970/01/01 00:00:00
HIZ 4:NONE
1970/01/01 00:00:00
RMS 1:NONE
1970/01/01 00:00:00
RMS 2:NONE
1970/01/01 00:00:00
RMS 3:NONE
1970/01/01 00:00:00
RMS 4:NONE
1970/01/01 00:00:00
F60 Feeder Protection System
6.4 RECORDS
6.4.5 BREAKER MAINTENANCE
2
values are in units of kA
-cycles. Refer to the
BREAKER OPERATING TIME
6.4.6 HI-Z RECORDS
is
6
to
RMS 1
6-25
Advertisement
Table of Contents
