Led Indicators - GE F60 Instruction Manual

4.2 FACEPLATE INTERFACE
The following figure shows the vertical arrangement of the faceplate panels for relays ordered with the vertical option.
4
a) ENHANCED FACEPLATE
The enhanced front panel display provides five columns of LED indicators. The first column contains 14 status and event
cause LEDs, and the next four columns contain the 48 user-programmable LEDs.
The RESET key is used to reset any latched LED indicator or target message, once the condition has been cleared (these
latched conditions can also be reset via the
intended for connection to a portable PC.
The USER keys are used by the breaker control feature.
Figure 4–18: TYPICAL LED INDICATOR PANEL FOR ENHANCED FACEPLATE
The status indicators in the first column are described below.
• IN SERVICE: This LED indicates that control power is applied, all monitored inputs, outputs, and internal systems are
OK, and that the device has been programmed.
4-14
MENU
HELP
MESSAGE
ESCAPE
ENTER VALUE 0
STATUS EVENT CAUSE
IN SERVICE VOLTAGE
TROUBLE CURRENT
TEST MODE FREQUENCY
TRIP OTHER
ALARM PHASE A
PICKUP PHASE B
PHASE C
NEUTRAL/GROUND
Figure 4–17: UR-SERIES STANDARD VERTICAL FACEPLATE PANELS
SETTINGS
F60 Feeder Protection System
DISPLAY
7 8 9
4 5 6
KEYPAD
1 2 3
.
+/-
LED PANEL 3
LED PANEL 2
RESET
LED PANEL 1
USER 1
USER 2
USER 3
INPUT/OUTPUTS
842811A1.CDR
4 HUMAN INTERFACES

4.2.2 LED INDICATORS

menu). The RS232 port is
RESETTING
GE Multilin