Iec 61580 Goose Analog Values; Wattmetric Ground Fault; Transducer Inputs And Outputs - GE F60 Instruction Manual

6.3 METERING
PATH: ACTUAL VALUES
IEC 61850
GOOSE ANALOGS
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2
for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
PATH: ACTUAL VALUES
WATTMETRIC
GROUND FAULT 1
This menu displays the wattmetric zero-sequence directional element operating power values.
6
PATH: ACTUAL VALUES
DCMA INPUT xx
Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
PATH: ACTUAL VALUES
RTD INPUT xx
Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
6-22
METERING IEC 61850 GOOSE ANALOGS
ANALOG INPUT
0.000
ANALOG INPUT
MESSAGE
0.000
ANALOG INPUT 16
MESSAGE
0.000
METERING

WATTMETRIC GROUND FAULT 1(2)

WATT GND FLT 1:
0.000 W
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
F60 Feeder Protection System

6.3.8 IEC 61580 GOOSE ANALOG VALUES

1
2
↓
6.3.9 WATTMETRIC GROUND FAULT

6.3.10 TRANSDUCER INPUTS AND OUTPUTS

DCMA INPUT xx
RTD INPUT xx
6 ACTUAL VALUES
GE Multilin