Direct Devices Status; Iec 61850 Goose Integers; Egd Protocol Status - GE F60 Instruction Manual

6.2 STATUS
The
UNRETURNED MSG COUNT
make the trip around the communications ring. The
direct output messages that have been received but fail the CRC check. High values for either of these counts may indicate
on a problem with wiring, the communication channel, or one or more relays. The
values can be cleared using the
COUNT
The to
DIRECT INPUT 1
PATH: ACTUAL VALUES
DIRECT DEVICES
STATUS
These actual values represent the state of direct devices 1 through 16.
PATH: ACTUAL VALUES
IEC 61850
GOOSE UINTEGERS
6
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2
for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO5 integer input data points are displayed in this menu. The GGIO5 integer data values are received
via IEC 61850 GOOSE messages sent from other devices.
a) FAST EXCHANGE
PATH: ACTUAL VALUES
FAST EXCHANGE 1
These values provide information that may be useful for debugging an EGD network. The EGD signature and packet size
for the fast EGD exchange is displayed.
6-8
values (one per communications channel) count the direct output messages that do not
CLEAR DIRECT I/O COUNTERS
values represent the state of each direct input.
DIRECT INPUT (32)
STATUS

DIRECT DEVICES STATUS

DIRECT DEVICE 1
STATUS: Offline
DIRECT DEVICE 2
MESSAGE
STATUS: Offline
DIRECT DEVICE 16
MESSAGE
STATUS: Offline
STATUS IEC 61850 GOOSE UINTEGERS
UINT INPUT
UINT INPUT
MESSAGE
UINT INPUT 16
MESSAGE
STATUS

EGD PROTOCOL STATUS

FAST EXCHANGE 1
SIGNATURE:
FAST EXCHANGE 1
MESSAGE
DATA LENGTH:
F60 Feeder Protection System
values (one per communications channel) count the
CRC FAIL COUNT
command.
Range: Offline, Online
Range: Offline, Online
↓
Range: Offline, Online
1
0
2
0
↓
0
PRODUCER STATUS
0
0
6 ACTUAL VALUES
and
UNRETURNED MSG COUNT
6.2.16 DIRECT DEVICES STATUS

6.2.17 IEC 61850 GOOSE INTEGERS

6.2.18 EGD PROTOCOL STATUS
FAST EXCHANGE 1
GE Multilin
CRC FAIL