Virtual Outputs; Autoreclose 1; Remote Devices - GE F60 Instruction Manual

6 ACTUAL VALUES
For form-A contact outputs, the state of the voltage and current detectors is displayed as Off, VOff, IOff,
On, IOn, and VOn. For form-C contact outputs, the state is displayed as Off or On.
NOTE
PATH: ACTUAL VALUES STATUS

VIRTUAL OUTPUTS

MESSAGE
MESSAGE
The present state of up to 96 virtual outputs is shown here. The first line of a message display indicates the ID of the virtual
output. For example, 'Virt Op 1' refers to the virtual output in terms of the default name-array index. The second line of the
display indicates the logic state of the virtual output, as calculated by the FlexLogic™ equation for that output.
PATH: ACTUAL VALUES STATUS

AUTORECLOSE 1

The automatic reclosure shot count is shown here.
a) STATUS
PATH: ACTUAL VALUES STATUS

REMOTE DEVICES

STATUS
MESSAGE
MESSAGE
MESSAGE
The present state of up to 16 programmed remote devices is shown here. The
cates whether or not all programmed remote devices are online. If the corresponding state is "No", then at least one
required remote device is not online.
GE Multilin
VIRTUAL OUTPUTS
Virt Op 1
Off
Virt Op 2
Off
↓
Virt Op 96
Off
AUTORECLOSE AUTORECLOSE 1(2)
AUTORECLOSE 1
SHOT COUNT: 0
REMOTE DEVICES STATUS
All REMOTE DEVICES
ONLINE: No
REMOTE DEVICE 1
STATUS: Offline
REMOTE DEVICE 2
STATUS: Offline
↓
REMOTE DEVICE 16
STATUS: Offline
F60 Feeder Protection System
6.2.7 VIRTUAL OUTPUTS
Range: On, Off
Range: On, Off
Range: On, Off
6.2.8 AUTORECLOSE
Range: 0, 1, 2, 3, 4
6.2.9 REMOTE DEVICES
Range: Yes, No
Range: Online, Offline
Range: Online, Offline
Range: Online, Offline
ALL REMOTE DEVICES ONLINE
6.2 STATUS
6
message indi-
6-5