Iec 61580 Goose Analog Values; Wattmetric Ground Fault; Phasor Measurement Unit - GE F60 Instruction Manual

6 ACTUAL VALUES
Table 6–2: FLEXELEMENT BASE UNITS (Sheet 2 of 2)
SOURCE VOLTAGE
SYNCHROCHECK
(Max Delta Volts)

PATH: ACTUAL VALUES METERING
 IEC 61850
 GOOSE ANALOGS
MESSAGE
MESSAGE
MESSAGE
The F60 Feeder Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. See the Order Codes section of chapter 2
for details.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.

PATH: ACTUAL VALUES METERING
 WATTMETRIC
 GROUND FAULT 1
This menu displays the wattmetric zero-sequence directional element operating power values.

PATH: ACTUAL VALUES METERING
 PMU 1

MESSAGE
MESSAGE
MESSAGE
MESSAGE
GE Multilin
V = maximum nominal primary RMS value of the +IN and –IN inputs
BASE
V = maximum primary RMS value of all the sources related to the +IN and –IN inputs
BASE

IEC 61850 GOOSE ANALOGS
ANALOG INPUT 1
0.000
ANALOG INPUT 2
0.000
ANALOG INPUT 3
0.000
↓
ANALOG INPUT 32
0.000


WATTMETRIC GROUND FAULT 1(2)

WATT GND FLT 1:
0.000 W


PHASOR MEASUREMENT UNIT

PMU 1 VA:
0.0000 kV, 0.00°
PMU 1 VB:
0.0000 kV, 0.00°
PMU 1 VC:
0.0000 kV, 0.00°
PMU 1 VX:
0.0000 kV, 0.00°
PMU 1 V1:
0.0000 kV, 0.00°
F60 Feeder Protection System

6.3.8 IEC 61580 GOOSE ANALOG VALUES

6.3.9 WATTMETRIC GROUND FAULT
6.3.10 PHASOR MEASUREMENT UNIT

PMU 1
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
Range: Va or Vab per VT bank connection
6.3 METERING
6
6-25