Iec 61580 Goose Analog Values; Transducer Inputs And Outputs - GE M60 Instruction Manual

6.3 METERING
PATH: ACTUAL VALUES
 IEC 61850
 GOOSE ANALOGS
The M60 Motor Protection System is provided with optional IEC 61850 communications capability. This
feature is specified as a software option at the time of ordering. Refer to the Ordering section of chapter 2
for additional details. The IEC 61850 protocol features are not available if CPU type E is ordered.
The IEC 61850 GGIO3 analog input data points are displayed in this menu. The GGIO3 analog data values are received
via IEC 61850 GOOSE messages sent from other devices.
a) RTD AND DCMA INPUTS
PATH: ACTUAL VALUES
 DCMA INPUT xx

Actual values for each dcmA input channel that is enabled are displayed with the top line as the programmed channel ID
and the bottom line as the value followed by the programmed units.
6
PATH: ACTUAL VALUES
 RTD INPUT xx

Actual values for each RTD input channel that is enabled are displayed with the top line as the programmed channel ID and
the bottom line as the value.
b) RRTD INPUTS
PATH: ACTUAL VALUES
 RRTD INPUT 1

Actual values for each RRTD input channel that is enabled are displayed this menu. The top line the programmed RRTD ID
and the bottom line displays the metered value.
6-22
 
METERING IEC 61850 GOOSE ANALOGS
ANALOG INPUT
0.000
ANALOG INPUT
MESSAGE
0.000
ANALOG INPUT 32
MESSAGE
0.000
 
METERING TRANSDUCER I/O DCMA INPUTS
DCMA INPUT xx
0.000 mA
 
METERING TRANSDUCER I/O RTD INPUTS
RTD INPUT xx
-50 °C
 
METERING TRANSDUCER I/O RRTD INPUTS
RRTD INPUT 1
-50°C
M60 Motor Protection System

6.3.9 IEC 61580 GOOSE ANALOG VALUES

1
2
↓

6.3.10 TRANSDUCER INPUTS AND OUTPUTS


DCMA INPUT xx

RTD INPUT xx

RRTD INPUT 1(12)
6 ACTUAL VALUES
GE Multilin