Direct Inputs; Direct Devices Status - GE D30 series Instruction Manual

Line distance protection system. ur series
Hide thumbs Also See for D30 series:
Table of Contents

Advertisement

6.2 STATUS
is the time difference, measured in nanoseconds, between the fractional seconds portion of the time
PTP-— IRIG-B DELTA
being received via PTP and that being received via IRIG-B. A positive value indicates that PTP time is fast compared to
IRIG-B time. The value 999,999,999 indicates that the difference is not being measured due to one or both of the time sig-
nals being absent or disabled.
PATH: ACTUAL VALUES
 DIRECT INPUTS
6
The
AVERAGE MSG RETURN TIME
ring configuration (this value is not applicable for non-ring configurations). This is a rolling average calculated for the last
ten messages. There are two return times for dual-channel communications modules.
The
UNRETURNED MSG COUNT
make the trip around the communications ring. The
direct output messages that have been received but fail the CRC check. High values for either of these counts may indicate
on a problem with wiring, the communication channel, or one or more relays. The
values can be cleared using the
COUNT
The
to
DIRECT INPUT 1
PATH: ACTUAL VALUES
 DIRECT DEVICES
 STATUS
6-8

STATUS

DIRECT INPUTS

AVG MSG RETURN
TIME CH1: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH1: 0
CRC FAIL COUNT
MESSAGE
CH1: 0
AVG MSG RETURN
MESSAGE
TIME CH2: 0 ms
UNRETURNED MSG
MESSAGE
COUNT CH2: 0
CRC FAIL COUNT
MESSAGE
CH2: 0
DIRECT INPUT
MESSAGE
On
DIRECT INPUT
MESSAGE
On
DIRECT INPUT 32:
MESSAGE
On
is the time taken for direct output messages to return to the sender in a direct input/output
values (one per communications channel) count the direct output messages that do not
CLEAR DIRECT I/O COUNTERS
values represent the state of each direct input.
DIRECT INPUT (32)

STATUS

DIRECT DEVICES STATUS

DIRECT DEVICE 1
STATUS: Offline
DIRECT DEVICE 2
MESSAGE
STATUS: Offline
DIRECT DEVICE 16
MESSAGE
STATUS: Offline
D30 Line Distance Protection System
1:
2:
values (one per communications channel) count the
CRC FAIL COUNT
command.
Range: Offline, Online
Range: Offline, Online
Range: Offline, Online
6 ACTUAL VALUES
6.2.15 DIRECT INPUTS
and
UNRETURNED MSG COUNT
6.2.16 DIRECT DEVICES STATUS
GE Multilin
CRC FAIL

Advertisement

Table of Contents
loading

Table of Contents