Connecting Peripherals - Wavion WBS-2400-POE-FCC Installation Manual

Installing the Wavion WBS-2400 Metro Base Station
Apply silicon in the gap between the strip and the connector access cover.
13.
Close strip
Close
connector
access cover
Figure 3.27. Closing the Covers
Create a drip loop of at least 10 inches by looping the cables back to the tray and using a
14.
tie wrap to secure.
W
ARNING
power to the injector until you insert the RJ45 connector into its socket, or you may
risk electric shock.

Connecting Peripherals

The WBS-2400 can source 24VDC or 12VDC power on ETH A and 48VDC power on the ETH B
connectors on pins 4,5 and 7,8, This allows the WBS-2400 to power an external device.
38 Wavion
:
If you are using a Wavion Injector, make sure you are not supplying
Apply silicon